cap screw

Examples

• All

• The commercial hex-head cap-screw pitch-diameter evaluation showed that, by either system 21 or system 22, the 2A undersize condition was detected.

  Academic text (1996)

• The pitch diameter size of the ASTM A354 grade BD cap screws correlated with the tensile strength.

  Academic text (1996)

• Two-piece balancing gear clamps have been made of two separate hubs held together by two supplied cap screws.

  Academic text (1994)

• Each one consists of three principal components: a round threaded nut, a hardened washer, and a collection of cap screws that ring the face of the nut.

  Academic text (2001)

• The lots of hex-head cap screws were wedge-tensile tested, and each lot of hex nuts was proof-load tested in accordance with ASTM F606.

  Academic text (1996)

• Table 1. Aerospace nut pitch diameters. Table 2. Minimum tensile strength versus minor and pitch diameters. Table 3. Commercial hex head cap screw. Table 4. Commercial torque-tension results.

  Academic text (1996)

• The engineer recommended using cap screws to secure the components in place.

• To assemble the machine, you need to insert several cap screws into the designated holes.

Synonyms

S

screw

vscap screw

85 1.2

A small metal piece with a spiral thread that holds things together when turned into wood or metal

is a specific finished-head fastener made for threaded holes in parts

M

machine screw

vscap screw

• Specialized

1 3.7

A metal screw with the same width along its length used with a nut or in a threaded hole

has a finished head rather than a slotted one

Surface Forms

Morphology

Etymology